When there is vibration or impact force in the machine, the slide rail and slide block are likely to deviate from the original fixed position, affecting the operation accuracy and service life. Therefore, the method of fixing the slide rail is very important.So,PYG here to take you some methods for helping everyone to make a deep knowledge of linear guideways.
① clamping method: the side of the slide rail and the slide block should slightly protrude the edge of the bed and the table, and the clamping plate should be processed using a chute to prevent interference with the Angle of the slide rail or slide block during installation.
② Push and pull fixing method: by applying pressure to push and pull locking, too much locking force is easy to lead to the bending of the slide or the deformation of the outer shoulder, so special attention should be paid to the adequacy of the locking force when installing.
③ Roller fixing method: Press the roller by pushing the inclined surface of the bolt head, so pay special attention to the position of the bolt head.
④ Positioning bolt fastening method: Due to the limitation of installation space, the size of the bolt should not be too large.
That's all for today's share,if there is anymore question,please contact us,we will reply you soon.Follow PYG,and be a leader in the linear guideway industry.
Post time: Nov-03-2023
