As one of the core components of the equipment, the linear rail slider has the function of guiding and supporting. In order to ensure that the machine has a high machining accuracy, the guide rail is required to have a high guiding accuracy and good motion stability. During the operation of the equipment, due to the large amount of corrosive dust and smoke produced by the workpiece during processing, these smoke and dust are deposited on the surface of the guide rail for a long time, which has a great impact on the processing accuracy of the equipment, and will form corrosion points on the surface of the guide rail, shortening the service life of the equipment. In order to make the machine work normally and stably and ensure the processing quality of the product, the daily maintenance of the guide rail should be carefully done.
- 1.Cleaning: Clean the guide rail regularly to remove dust and dirt on the surface to ensure the smoothness and finish of the guide rail surface.
- 2.Lubrication and protection: The linear railway is lubricated and protected regularly to reduce friction and wear. In the lubrication should pay attention to the selection of appropriate lubricating oil, and can not be overapplied.
3.Check and adjust: Regularly check whether the fastening bolts of the guide rail are loose, whether the guide block is worn, and adjust and replace them in time.
4.Protection: keep the environment around the linear guide clean and dry, you can install a protective cover on the outside of the guide rail to prevent water, oil and other substances into the guide rail, affecting the normal operation.
5.Avoid overload operation: in the use of linear guide, to avoid overload or overload operation, so as not to cause deformation or damage to the guide rail.
If you want to know more about guide rail knowledge, just contact us, we will quickly reply to you.
Post time: Dec-05-2023
