Hagaha toosan ee PMGN waa hagaha toosan nooca kubbadaha yaryar
1. cabbir yar, miisaan fudud, oo ku habboon qalabka yaryar
2. Naqshadeynta xiriirka gothic ayaa sii wadi karta culeysyada dhammaan jihooyinka, qallafsanaan sare, saxsanaan sare
3. Leh kubbadaha haynta iyo beddelka iyada oo la raacayo xaalad sax ah
1. Nidaamka duubista
block, tareenka, koofiyada dhamaadka, kubbadaha birta, haynta
2. Nidaamka saliidda
PMGN15 waxay leedahay ibta dufanka, laakiin PMGN5, 7, 9,12 waxay u baahan yihiin in lagu subiyo godka ku yaal dhinaca daboolka dhamaadka
3. Nidaamka ilaalinta boodhka
xoqin, shaabadda dhamaadka, shaabadda hoose
PMG block iyo nooca tareenka
Nooca | Qaabka | Qaabka xannibaadda | Dhererka (mm) | Dhererka tareenka (mm) | Codsiga |
Nooca caadiga ah | PMGN-CPMGN-H | 4 ↓ 16 | 100 ↓ 2000 | PrinterRobotics Qalabka cabbirka saxda ah Qalabka semiconductor |
Waxaan xakameynaa tafaasiil kasta oo ku saabsan hagida hagaha ilaa uu macmiilku ku qanco.
Waxaan ka qaybgalnaa bandhigyo badan si aan u wanaajino caannimada hagaha kubbad-qaadista ee wareegtada ah .
Astaamaha
1. Miisaan yar oo fudud, oo ku habboon qalabka yar yar.
2. Dhammaan agabka loogu talagalay block iyo tareenada waxay ku jiraan darajo gaar ah oo ah birta aan daxalka lahayn oo ay ku jirto kubbadda birta, kubbad-hayeyaasha ujeedada ka hortagga daxalka.
3. Naqshadeynta xiriirka Gothic waxay sii wadi kartaa culeyska ka imanaya dhammaan jihooyinka waxayna bixinaysaa qallafsanaan sare iyo saxnaan sare.
4. Kubadaha birta ah waxaa qaban doona haye yar si looga fogaado in kubbaduhu soo dhacaan xitaa marka baloogyada laga saaro rakibaadda tareenka.
5. Noocyada la beddeli karo ayaa lagu heli karaa darajooyin sax ah oo gaar ah.
Faa'iidooyinka
A. Dhaqdhaqaaqa xawaaraha sare wuxuu ku suurta geli karaa awood hoose
B. Awood rarid siman oo jiho kasta ah
C. Ku rakibid fudud
D. Saliid fudud
E. Isbeddelka
Cabirrada oo dhammaystiran dhammaan cabbirka eeg shaxda hoose ama soo deji buug-yarahayada:
PMGN7, PMGN9, PMGN12
PMGN15
Qaabka | Cabirka Golaha (mm) | Cabbirka xannibaadda (mm) | Cabirka Tareenka (mm) | Koritaanka cabbirka boodhkatareenka | Qiimaynta culeyska firfircoon ee aasaasiga ah | Qiimaynta culeyska aasaasiga ah ee taagan | miisaanka | |||||||||
Block | Rxanuun | |||||||||||||||
H | N | W | B | C | L | WR | HR | D | P | E | mm | C (kN) | C0 (kN) | kg | Kg/m | |
PMGN7C | 8 | 5 | 17 | 12 | 8 | 22.5 | 7 | 4.8 | 4.2 | 15 | 5 | M2*6 | 0.98 | 1.24 | 0.010 | 0.22 |
PMGN7H | 8 | 5 | 17 | 12 | 13 | 30.8 | 7 | 4.8 | 4.2 | 15 | 5 | M2*6 | 1.37 | 1.96 | 0.015 | 0.22 |
PMGN9C | 10 | 5.5 | 20 | 15 | 10 | 28.9 | 9 | 6.5 | 6 | 20 | 7.5 | M3*8 | 1.86 | 0.016 | 0.016 | 0.38 |
PMGN9H | 10 | 5.5 | 20 | 15 | 16 | 39.9 | 9 | 6.5 | 6 | 20 | 7.5 | M3*8 | 2.55 | 0.026 | 0.026 | 0.38 |
PMGN12C | 13 | 7.5 | 27 | 20 | 15 | 34.7 | 12 | 8 | 6 | 25 | 10 | M3*8 | 2.84 | 3.92 | 0.034 | 0.65 |
PMGN12H | 13 | 7.5 | 27 | 20 | 20 | 45.4 | 12 | 8 | 6 | 25 | 10 | M3*8 | 3.72 | 5.88 | 0.054 | 0.65 |
PMGN15C | 16 | 8.5 | 32 | 25 | 20 | 42.1 | 15 | 10 | 6 | 40 | 15 | M3*10 | 4.61 | 5.59 | 0.059 | 1.06 |
PMGN15H | 16 | 8.5 | 32 | 125 | 25 | 58.5 | 15 | 10 | 6 | 40 | 15 | M3*10 | 6.37 | 9.11 | 0.092 | 1.06 |
1. Kahor intaadan dalabka gudbin, ku soo dhawoow inaad noo soo dirto weydiin, si aad si fudud ugu sharaxdo shuruudahaaga;
2. Dhererka caadiga ah ee hagaha toosan ee 1000mm ilaa 6000mm, laakiin waxaan aqbalnaa dhererka la sameeyay;
3. Midabka xannibaadda waa qalin iyo madow, haddii aad u baahan tahay midab gaar ah, sida casaan, cagaar, buluug, tani waa la heli karaa;
4. Waxaan helnaa MOQ yar yar iyo muunada tijaabada tayada;
5. Haddii aad rabto inaad noqoto wakiilkayaga, ku soo dhawoow inaad na soo wacdo +86 19957316660 ama email noogu soo dir.