1. rakibaadda habboon
2. qeexid dhamaystiran
3. sahay ku filan
1. Nidaamka duubista
block, tareenka, koofiyada dhamaadka, kubbadaha birta, haynta
2. Nidaamka saliidda
PMGN15 waxay leedahay ibta dufanka, laakiin PMGN5, 7, 9,12 waxay u baahan yihiin in lagu subiyo godka ku yaal dhinaca daboolka dhamaadka
3. Nidaamka ilaalinta boodhka
xoqin, shaabadda dhamaadka, shaabadda hoose
1. Nakhshad yar oo toosan oo yar oo nakhshad ah ayaa wanaajisa awoodda culeyska inta badan.
2. wuxuu qaataa Gothic afar dhibcood naqshadeynta xiriirka, wuxuu qaadi karaa culeys sare oo dhan walba ah, qallafsanaan sare iyo saxsanaan sare.
3. leeyahay naqshadaynta kubbadaha, sidoo kale waa la beddeli karaa.
waxaan soo qaadanaynaa tusaale 12
PMGW block iyo nooca tareenka
Nooca | Qaabka | Qaabka xannibaadda | Dhererka (mm) | Dhererka tareenka (mm) | Codsiga |
Nooca Flange | PMGW-CPMGW-H | 4 ↓ 16 | 40 ↓ 2000 | PrinterRobotics Qalabka cabbirka saxda ah Qalabka semiconductor |
Codsiga hagayaasha tooska ah ee PMGW waxaa ka mid ah: Mashiinka semi-conductor, daabacaadda guddiga korantada IC qalabka kulanka, qalabka caafimaadka, cudud farsamo, cabbirada saxda ah, mashiinka otomaatiga ah ee rasmiga ah iyo hagayaasha toosan ee kale.
Tareen yar oo toosan oo sax ah waxaa ka mid ah: Caadi (C), Sare (H), Saxnaanta (P)
Hagaha toosan ee yar ayaa leh Horudhac Caadi ah, Eber iyo Iftiin, eeg shaxda hoose:
Heerka soo-qaadista | Calaamadee | Horay u soo rarid | Saxnaanta |
Caadi ah | ZF | 4 ~ 10 um | C |
Eber | Z0 | 0 | CP |
Iftiin | Z1 | 0.02C | CP |
Xadhkaha toosan ee yar yar ee caadiga ah, waxaanu ku rakibnaa qashinka saliida ee labada daraf ee baloogyada si aan uga fogaano boodhka ama qaybaha gudaha gudaha block si ay u saameeyaan wakhtiga nolosha iyo saxnaanta.Xirmooyinka boodhka ayaa lagu rakibay baloogga hoostiisa si looga fogaado boodhka ama qaybo ka mid ah qaybta hoose, haddii macaamiishu rabaan inay doortaan xirmooyinka boodhka, waxay ku dari karaan + U ka dib qaabka tareenada yar ee hagaha.
Fiiri shaxda hoose ee booska rakibaadda:
Qaabka | Boodhka Shaabada | H1mm | Qaabka | Boodhka Shaabada | H1mm |
MGN 5 | - | - | MGW 5 | - | - |
MGN 7 | - | - | MGW 7 | - | - |
MGN 9 | • | 1 | MGW 9 | • | 2.1 |
MGN 12 | • | 2 | MGW 12 | • | 2.6 |
MGN 15 | • | 3 | MGW 15 | • | 2.6 |
Cabirrada dhammaystiran ee dhammaan cabbirka tareenada toosan ee yar yar eeg shaxda hoose ama soo deji buug-yarahayada:
PMGW7, PMGW9, PMGW12
PMGW15
Qaabka | Cabirka Golaha (mm) | cabbirka block (mm) | Koritaanka cabbirka boodhka ee tareenka | Ku dhejinta boodhka tareenka | Qiimaynta culeyska firfircoon ee aasaasiga ah | Qiimaynta culeyska aasaasiga ah ee taagan | La ogol yahay daqiiqad la qiimeeyay taagan | miisaanka | ||||||||||||||||||||||
MR | MP | MY | Block | Tareen | ||||||||||||||||||||||||||
H | H1 | N | W | B | B1 | C | L1 | L | G | Gn | Mxl | H2 | WR | WB | HR | D | h | d | P | E | mm | C (kN) | C0 (kN) | Nm | Nm | Nm | kg | Kg/m | ||
PMGW7C | 9 | 1.9 | 5.5 | 25 | 19 | 3 | 10 | 21 | 31.2 | - | Φ1.2 | M3*3 | 1.85 | 14 | - | 5.2 | 6 | 3.2 | 3.5 | 30 | 10 | M3*6 | 1.37 | 2.06 | 15.7 | 7.14 | 7.14 | 0.02 | 0.51 | |
PMGW7H | 19 | 30.8 | 41 | 1.77 | 3.14 | 23.45 | 15.53 | 15.53 | 0.029 | |||||||||||||||||||||
PMGW9C | 12 | 2.9 | 6 | 30 | 21 | 4.5 | 12 | 27.5 | 39.3 | - | Φ1.2 | M3*3 | 2.4 | 18 | - | 7 | 6 | 4.5 | 3.5 | 30 | 10 | M3*8 | 2.75 | 4.12 | 40.12 | 18.96 | 18.96 | 0.04 | 0.91 | |
PMGW9H | 23 | 3.5 | 24 | 38.5 | 50.7 | 3.43 | 5.89 | 54.54 | 34 | 34 | 0.057 | |||||||||||||||||||
PMGW12C | 14 | 3.4 | 8 | 40 | 28 | 6 | 15 | 31.3 | 46.1 | - | Φ1.2 | M3*3.6 | 2.8 | 24 | - | 8.5 | 8 | 4.5 | 4.5 | 40 | 15 | M4*8 | 3.92 | 5.59 | 70.34 | 27.8 | 27.8 | 0.071 | 1.49 | |
PMGW12H | 28 | 45.6 | 60.4 | 5.1 | 8.24 | 102.7 | 57.37 | 57.37 | 0.103 | |||||||||||||||||||||
PMGW15C | 16 | 3.4 | 9 | 60 | 45 | 7.5 | 20 | 38 | 54.8 | 5.2 | M3 | M4*4.2 | 3.2 | 42 | 23 | 9.5 | 8 | 4.5 | 4.5 | 40 | 15 | M4*10 | 6.77 | 9.22 | 199.34 | 56.66 | 56.66 | 0.143 | 2.86 | |
PMGw15H | 35 | 57 | 73.8 | 8.93 | 13.38 | 299.01 | 122.6 | 122.6 | 0.215 |