Pholoso ea pele ea fektheri e phahametseng le ho bitsa setšoantšo se atlehileng sa Tataiso ea Miniature

Tataiso ea pele e phahameng ea fektheri le ho bitsa tataiso e atlehileng ea lineare e atlehileng

Tlhaloso e khutšoane:

Mohlala:Pmgn-c / PMGN-H

Boholo:7,9,12,15,15

Terene ea Terene:S55c

Litlhophiso tsa thibelo:20 Cror

Mohlala:e fumaneha

Nako ea thomello:Matsatsi a 5-15

Boemo ba pele:C, H, P, SP, up

Romella lengolo-tsoibila ho rona Whatsapp

Lintlha tsa sehlahisoa

Li-tag tsa lihlahisoa

Ho ba k'hamphani e ncha e ntlafatsang, re ne re ke ke ra ba hantle, empa re ne re sa khone ho ba molekane oa hau oa hlooho ea khomo. mahala hoiteanye le rona. Re lebelletse ho theha likamano tsa khoebo tse atlehileng le bareki ba bacha lefatšeng ka bophara haufinyane.

PMAN Equinity Tataiso ea LineAAR

Tataiso ea Li-PMGN ea PMV
1. Boholo bo nyane, boima bo bobebe, bo loketseng lisebelisoa tse nyane
2. Moralo oa Khokahano ea Geoc ARC o ka matlafatsa lijaro tse tsoang ka nqa tsohle tse phahameng, tse thata tse phahameng, ho nepahala haholo
3. E na le libolo tsa bolo ea maoto le tse fetoletsoeng tlasa maemo a ho nepahala

1. Sisteme ea Rolling

Block, seporo, emisa cap, libolo tsa tšepe, lisepa

2. Sistimi ea Lubrication

Pmgre5

3. Sistimi ea Bopaki

Scaraper, tiiso ea tiiso, tiiso e ka tlase

Re nka mohlala 12 Mohlala ho etsa papiso ea khoutu e 'ngoe le e' ngoe

Tataiso ea Tšollo ea 7

Leqephe la PMG Block le Rail

Mofuta

Mohlala

Block sebopeho

Bophahamo (limilimithara)

Bolelele ba terene (mm)

Kopo

Mofuta o tloaelehileng

Cpgn-cpmgn-h

↓

100

↓

2000

Khatiso ea Printerrobotissprecisictor

TLHOKOMELISO LITLHAKISO

Re laola lintlha ka seng tsa li-slide tse nang le tataiso ho fihlela moreki a khotsofetse.

Botumo bo botle

Re nka karolo lipontšong tse ngata tsa pontšo ea ho ntlafatsa ho tsebahala ha ho na le bolotsana ba ho tsamaisa boloi.

Taki e nyane ea LM

Likaroloana

1. Boima ba boima le bo bobebe, bo loketseng lisebelisoa tse nyane.

2. Lisebelisoa tsohle tsa ho thibela le seporo li sehlopheng se khethehileng sa tšepe e kenyelletsang bolo ea tšepe, sesebelisoa sa bolo bakeng sa morero oa boko.

3. Moralo oa ho ikopanya o ka boloka mojaro ho tsoa litseleng tsohle le ho fana ka thata bo thata le ho nepahala ho phahameng.

4. Steel balls will be held by miniature retainer to avoid the balls from falling out even when the blocks are removed from the rail installation.

5. Mefuta e ikhethileng e fumaneha maemong a itseng a nepahetseng.

Melemo

A. Ho sisinyeha ka lebelo le phahameng ka lebelo le tlase

B. Alice e lekanang ka mahlakoreng 'ohle

C. Ho kenya habonolo

D. lubrication e bonolo

E. Ho hokahana

Boholo

Boholo bo felletseng bakeng sa boholo bohle bona ba bona tafole kapa jarolla lethathamo la rona:

Pmgn7, PMGZ, PMG12

Pmgn15

Mohlala	Boholo ba kopano (mm)			boholo ba block (limilimithara)										Boholo ba bolt bakeng sa terene							Bolt ea ho hola ea seporo	Tekanyetso ea motheo ea matla oa matla	Tekanyetso ea Moroalo ea Statist Statri	Nako e lumelloang ea Static			Boima
																								MR	MP	MY	Block	Seporo
	H	H1	N	W	B	B1	C	L1	L	G	GR	Mxl	H2	WR	HR	D	h	d	P	E	mm	C (Kn)	C0 (Kn)	Nm	Nm	Nm	kg	Kg / m
Pmgn7c	8	1.5	5	17	12	2.5	8	13.5	22.5	-	Φ1.2	M2 * 2.5	1.5	7	4.8	4.2	2.3	2.4	15	5	M2 * 6	0.98	1.24	4.7	2.84	2.84	0.01	0.22
Pmgn7h							13	21.8	30.8													1.37	1.96	7.64	4.8	4.8	0.015
Pmg9c	10	2	5.5	20	15	2.5	10	18.9	28.9	-	Φ1.2	M3 * 3	1.8	9	6.5	6	3.5	3.5	20	7.5	M3 * 8	1.86	2.55	11.76	7.35	7.35	0.016	0.38
Pmgn9h							16	29.9	39,9													2.55	4.02	19.6	18.62	18.62	0.026
PMGH12C	13	3	7.5	27	20	3.5	15	21.7	34.7	-	Φ1.4	M3 * 3.5	2.5	12	8	6	4.5	3.5	25	10	M3 * 8	2.84	3.92	25.48	13.72	13.72	0.034	0.65
PMGH12h							20	32.4	45.4													3.72	5.88	38.22	36.26	36.62	0.054
PMG15C	16	4	8.5	32	25	3.5	20	26.7	42.1	4.5	M3	M3 * 4	3	15	10	6	4.5	3.5	40	15	M3 * 10	4.61	5.59	45.08	21.56	21.56	0.059	1.06
Pmgn15h							25	43.4	58.8													6.37	9.11	73.5	57.82	57.82	0.092

Kaha ke khamphani e ncha e tsoelang pele, re ka se khonehe, empa re ntse re leka ho ba molekane oa hau ea hantle.
FOFT FOUTM HIGNT, Haeba u thahasella lihlahisoa tsa rona kapa u ka rata ho buisana ka tloaelo, ka kopo ikutloe u lokolohile ho ikopanya le rona. Re lebelletse ho theha likamano tsa khoebo tse atlehileng le bareki ba bacha lefatšeng ka bophara haufinyane.

E fetileng: Likarolo tsa cnc likarolo tsa cc linear motion "

E 'ngoe:Litšenyehelo tse phahameng tsa ho boloka tšebetso ea Tataiso ea Tataiso ea li-linear bakeng sa cnc

Ngola molaetsa oa hau mona 'me u e romelle ho rona